View DS2107SY_24564.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DS2107SY
DS2107SY
Rectifier Diode
Replaces JOctober 2001 version, DS4173-4.0 DS4173-4.1 December 2001
FEATURES
s Double Side Cooling s High Surge Capability
KEY PARAMETERS VRRM 4500V IF(AV) 3329A IFSM 52500A
APPLICATIONS
s Rectification s Freewheel Diode s DC Motor Control s Power Supplies s Welding s Battery Chargers
VOLTAGE RATINGS
Type Number Repetitive Peak Reverse Voltage VRRM V Conditions
DS2107SY45 4500 DS2107SY44 4400 DS2107SY43 4300 DS2107SY42 4200 DS2107SY41 4100 DS2107SY40 4000 Lower voltage grades available.
VRSM = VRRM + 100V Outline type code: F See Package Details for further information. Fig. 1 Package outline
ORDERING INFORMATION
When ordering, select the required part number shown in the Voltage Ratings selection table, e.g.: DS2107SY43 Note: Please use the complete part number when ordering and quote this number in any future correspondance relating to your order.
1/7
www.dynexsemi.com
DS2107SY
CURRENT RATINGS
Tcase = 75oC unless otherwise stated Symbol Double Side Cooled IF(AV) IF(RMS) IF Mean forward current RMS value Continuous (direct) forward current Half wave resistive load 3329 5229 4941 A A A Parameter Conditions Max. Units
Single Side Cooled (Anode side) IF(AV) IF(RMS) IF Mean forward current RMS value Continuous (direct) forward current Half wave resistive load 2221 3489 3073 A A A
Tcase = 100oC unless otherwise stated Symbol Double Side Cooled IF(AV) IF(RMS) IF Mean forward current RMS value Continuous (direct) forward current Half wave resistive load, Tcase = 100oC Tcase = 100oC Tcase = 100oC 2590 4070 3510 A A A Parameter Conditions Max. Units
Single Side Cooled (Anode side) IF(AV) IF(RMS) IF Mean forward current RMS value Continuous (direct) forward current Half wave resistive load, Tcase = 100oC Tcase = 100oC Tcase = 100oC 1710 2685 2110 A A A
2/7
www.dynexsemi.com
DS2107SY
SURGE RATINGS
Symbol IFSM I2t IFSM I2t Parameter Surge (non-repetitive) forward current I2t for fusing Surge (non-repetitive) forward current I2t for fusing Conditions 10ms half sine; Tcase = 150oC VR = 50% VRRM - 1/4 sine 10ms half sine; Tcase = 150oC VR = 0 Max. 42.0 8.82 x 106 52.5 13.8 x 106 Units kA A2s kA A2s
THERMAL AND MECHANICAL DATA
Symbol Parameter Conditions Double side cooled Rth(j-c) Thermal resistance - junction to case Single side cooled Cathode dc Clamping force 43.0kN with mounting compound Forward (conducting) Tvj Virtual junction temperature Reverse (blocking) Tstg Storage temperature range Clamping force -55 38.0 150 150 47.0
o
Min. dc Anode dc -
Max. 0.0095 0.019 0.019 0.002 0.004 160
Units
o
C/W
o
C/W C/W C/W C/W
o
o
Double side Single side
o
Rth(c-h)
Thermal resistance - case to heatsink
o
C
C C
o
kN
3/7
www.dynexsemi.com
DS2107SY
CHARACTERISTICS
Symbol VFM IRM QS Irr VTO rT Parameter Forward voltage Peak reverse current Total stored charge Peak reverse recovery current Threshold voltage Slope resistance Conditions At 3000A peak, Tcase = 25oC At VRRM, Tcase = 150oC IF = 2000A, dIRR/dt = 3A/s Tcase = 150C, VR = 100V At Tvj = 150C At Tvj = 150C Min. Max. 1.275 250 5000 150 0.77 0.167 Units V mA C A V m
CURVES
5000 Measured under pulse conditions Tj = 150C 10000
4000
8000
Mean power dissipation - (W)
Instantaneous forward current, IF - (A)
3000
6000
2000
4000
1000
2000 dc Half wave 3 phase 6 phase
0 0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
00
Instantaneous forward voltage, VF -(V)
2000 4000 Mean forward current, IF(AV) - (A)
6000
Fig.2 Maximum (limit) forward characteristics VFM Equation:VFM = A + Bln (IF) + C.IF+D.IF Where
Fig.3 Dissipation curves A = 0.671711 B = 0.011006 C = 0.000158 D = 0.000604 these values are valid for Tj = 125C for IF 500A to 5000A
4/7
www.dynexsemi.com
DS2107SY
100000
IF QS dIF/dt IRM
1000
Conditions: Tj = 150C VR = 100V IF = 2000A
Reverse recovery current, Irr - (A)
Conditions: Tj = 150C VR = 100V IF = 2000A
Stored charge, QS - (C)
10000
100
1000 0.1
1.0 10 Rate of decay of forward current, dIF/dt - (A/s)
100
10 0.1
1.0 10 Rate of decay of forward current, dIF/dt - (A/s)
100
Fig.4 Total stored charge
Fig.5 Maximum reverse recovery current
120 I2t = I2 x t 2 100
Peak half sine forward current - (kA)
0.1
Anode side cooled
80
10
Thermal impedance - (C/W)
0.01 Double side cooled
I2t value - (A2s x 106)
60
8
I2t 40 6
0.001
Conduction
20
4
d.c. Halfwave 3 phase 120 6 phase 60
Effective thermal resistance Junction to case C/W Double side 0.0095 0.0105 0.0112 0.0139 Single side 0.019 0.020 0.0207 0.0234
0 1 ms
10
1
23
5
10
20
2 50
0.0001 0.001
0.01
Cycles at 50Hz Duration
0.1 1 Time - (s)
10
100
Fig.6 Surge (non-repetitive) forward current vs time (with 50% VRRM at Tcase 150C)
Fig.7 Maximum (limit) transient thermal impedance junction to case
5/7
www.dynexsemi.com
DS2107SY
PACKAGE DETAILS
For further package information, please contact your nearest Customer Service Centre. All dimensions in mm, unless stated otherwise. DO NOT SCALE.
Hole O3.6 x 2.0 deep (One in each electrode)
Cathode O112.5 max O73 nom
O73 nom
Anode
Nominal weight: 1600g Clamping force: 50kN 10%
Package outine type code: Y
Note: 1. Package maybe supplied with pins and/or tags.
6/7
37.7 36.0
www.dynexsemi.com
DS2107SY
POWER ASSEMBLY CAPABILITY
The Power Assembly group was set up to provide a support service for those customers requiring more than the basic semiconductor, and has developed a flexible range of heatsink / clamping systems in line with advances in device types and the voltage and current capability of our semiconductors. We offer an extensive range of air and liquid cooled assemblies covering the full range of circuit designs in general use today. The Assembly group continues to offer high quality engineering support dedicated to designing new units to satisfy the growing needs of our customers. Using the up to date CAD methods our team of design and applications engineers aim to provide the Power Assembly Complete solution (PACs).
DEVICE CLAMPS
Disc devices require the correct clamping force to ensure their safe operation. The PACs range offers a varied selection of pre-loaded clamps to suit all of our manufactured devices. This include cube clamps for single side cooling of `T' 22mm Clamps are available for single or double side cooling, with high insulation versions for high voltage assemblies. Please refer to our application note on device clamping, AN4839
HEATSINKS
Power Assembly has its own proprietary range of extruded aluminium heatsinks. They have been designed to optimise the performance or our semiconductors. Data with respect to air natural, forced air and liquid cooling (with flow rates) is available on request. For further information on device clamps, heatsinks and assemblies, please contact your nearest Sales Representative or Customer Services.
http://www.dynexsemi.com e-mail: power_solutions@dynexsemi.com
HEADQUARTERS OPERATIONS DYNEX SEMICONDUCTOR LTD Doddington Road, Lincoln. Lincolnshire. LN6 3LF. United Kingdom. Tel: 00-44-(0)1522-500500 Fax: 00-44-(0)1522-500550 DYNEX POWER INC. 99 Bank Street, Suite 410, Ottawa, Ontario, Canada, K1P 6B9 Tel: 613.723.7035 Fax: 613.723.1518 Toll Free: 1.888.33.DYNEX (39639) CUSTOMER SERVICE CENTRES Mainland Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33 North America Tel: (613) 723-7035. Fax: (613) 723-1518. UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020 SALES OFFICES Mainland Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33 North America Tel: (613) 723-7035. Fax: (613) 723-1518. Toll Free: 1.888.33.DYNEX (39639) / Tel: (949) 733-3005. Fax: (949) 733-2986. UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020 These offices are supported by Representatives and Distributors in many countries world-wide. (c) Dynex Semiconductor 2001 Publication No. DS4173-4 Issue No. 4.1 December 2001 TECHNICAL DOCUMENTATION - NOT FOR RESALE. PRINTED IN UNITED KINGDOM
Datasheet Annotations: Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started. Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change. Advance Information: The product design is complete and final characterisation for volume production is well in hand. No Annotation: The product parameters are fixed and the product is available to datasheet specification.
This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request. All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.
7/7
www.dynexsemi.com

▲Up To Search▲

Price & Availability of DS2107SY

	To Download DS2107SY Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .